General Safety; Réversibilité Des Portes - Electrolux ERB 2622 Mode D'emploi

Table des Matières

Publicité

WARNINGS
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is supplied with the appliance in order that the
new owner can be acquainted with the functioning of the appliance and the relevant warnings.
If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old
appliance. This will prevent it from becoming a death-trap for a child.
These warnings are provided in the interest of safety. You must read them carefully before installing or
using the appliance.

General Safety

This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.
It is dangerous to alter the specifications or
modify this product in any way.
Before any cleaning or maintenance work is carried
out, be sure to switch off and unplug the appliance.
This appliance is heavy. Care should be taken
when moving it
Ice lollies can cause frost burns if consumed
straight from the appliance.
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.
The appliance must not be located close to
radiators or gas cookers.
Avoid prolonged exposure of the appliance to
direct sunlight.
There must be adequate ventilation round the
back of the appliance and any damage to the
refrigerant circuit must be avoided.
For freezers only (except built-in models): an
ideal location is the cellar or basement.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
Service/Repair
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person
This product should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
46
All manuals and user guides at all-guides.com
Service Centre, and always insist on genuine
spare parts.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging must
therefore only be carried out by authorized
technicians.
Use
The domestic refrigerators and freezers are
designed to be used specifically for the storage
of edible foodstuffs only.
Best performance is obtained with ambient
temperature between +18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C
(class N); +10°C and +32°C (class SN). The
class of your appliance is shown on its rating
plate.
Warning: when the ambient temperature is not
included within the range indicated for the class
of this appliance, the following instructions must
be observed: when the ambient temperature
drops below the minimum level, the storage
temperature in the freezer compartment cannot
be guaranteed; therefore it is advisable to use the
food stored as soon as possible.
Frozen food must not be re-frozen once it has
been thawed out.
Manufacturers' storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss. DO
NOT USE SHARP INSTRUMENTS to scrape off
frost or ice. Frost may be removed by using a
plastic scraper. Under no circumstances should
solid ice be forced off the liner. Solid ice should be
allowed to thaw when defrosting the appliance.
Printed on recycled paper
Réversibilité des portes
Les portes de ce réfrigérateur congélateur sont
réversibles: leurs sens d'ouverture peuvent être
modifiés en fonction du souhait de l'utilisateur.
Pour changer le sens d'ouverture des portes
1) Débranchez I'appareil
2) Otez la grille d'aération (D) qui est fixée par un
ressort.
3) Démontez la charnière inférieure (E) en
dévissant les vis de fixation.
4) Dégagez la porte inférieure de la charnière du
milieu (H).
5) Dévissez la charnière du milieu.
6) Dégagez la porte supérieure du pivot (G)
7) Enlevez le pivot et montez-le sur l'autre côté de
l'appareil.
8) Remontez la porte supérieure. Fixez la charnière
du milieu sur l'autre côté.
9) Remontez la porte inférieure.
10)Dévissez le pivot de la charnière (E) avec une clé
de 10 et montez-le sur l'autre côté de l'appareil.
11)Vissez la charnière inférieure (E) sur le côté
opposé en utilisant les vis enlevées
précédemment.
12)Détachez le cache (F) de la grille de ventilation
(D) et remontez-le dans l'ouverture qui est restée
libre sur l'autre côté.
13)Remontez la grille d'aération (D) qui est fixée par
un ressort.
14)Dévissez les poignées. Remontez-les de l'autre
côté après avoir percé les caches avec un
poinçon. Couvrez les trous libres avec les caches
contenus dans le sachet de la documentation.
Pour aligner les portes vous pouvez agir sur la
charnière du milieu.
La charnière du milieu (H) se règle horizontalement,
à l'aide d'un outil, après avoir desserré les deux vis.
La réversibilité des portes une fois effectuée,
contrôlez que les joints magnétiques adhèrent à la
carrosserie. Si la température à l'intérieur de la
pièce est trop basse (en hiver, par exemple), il se
peut que les joints n'adhèrent pas parfaitement.
Dans ce cas, si on ne veut pas attendre que les
joints reprennent leurs dimensions naturelles après
un certain temps, on pourra accélérer ce processus
en chauffant la partie intéressée à l'aide d'un sèche-
cheveux.
G
H
E
E
F
F
F
D
F
27

Publicité

Table des Matières
loading

Table des Matières