BarUp 271520 Manuel page 5

Operation
• Place the ice container (clear bowl) under the
bottom opening of the ice crusher.
NOTE: The ice crusher will not operate unless
the ice container and hopper are secured into
position.
• To begin crushing ice, drop cubes into the hop-
per on top of the appliance and switch it on. The
blades of the crusher are self-feeding.
• WARNING: DON'T PUSH CUBES DOWN THE
CHUTE WITH YOUR HANDS OR OTHER TOOLS.
Cleaning and maintenance
• UNPLUG POWER CORD FORM OUTLET.
• The appliance should be cleaned after use, and
before use if it hasn't been used for a prolonged
period of time.
• Remove the ice container and the hopper and
clean these parts with warm water and if need-
ed a mild detergent, rinse thoroughly.
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
PARTS
1. Ice chute
2. Housing
3. Switch
4. Ice container (12-cup capacity)
• If a large cube becomes lodged in the crushing
unit so that blades cannot reach it, switch the
appliance OFF and unplug from the outlet. Pour
warm water down the hopper until lodged cube
is melted or comes loose. WARNING: Only use
clear ice.
• When the crushing is finished the container can
be removed (the removal of the container will
stop the machine). Turn the appliance off and
unplug.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary.
• Pour hot water through top feeder to rinse the
blades.
• Wipe outside of the ice crusher with a clean
damp cloth.
• NEVER IMMERSE THE APPLIANCE IN WATER.
Note: After cleaning, the first batch of crushed ice
should be thrown away.
EN
5