Connect To A Bluetooth Device - DragonTouch NotePad K10 Mode D'emploi

EN

CONNECT TO A BLUETOOTH DEVICE

Turn on Bluetooth
You must pair your device with another device before you can transfer files between them.
Under "Settings", tap "Connected devices-Connection preferences-Bluetooth-ON", the
Bluetooth indicator then appears in the status bar. It will start searching for available
devices nearby. If you need re-scan, tap the menu on the top right corner, and tap
"refresh".
Scan Device
After scanning, there will be a list of all available Bluetooth devices in range. If the device
you want to pair with isn't in the list, ensure that the other device is turned on and set to
be discoverable.
Pair with Bluetooth Device
Tap the name of an available Bluetooth device you want to pair with. On the target device
you will get a 'Bluetooth Pairing Request' dialog. Tap 'Pair', it will then show you paired
devices.
9:16 AM
Bluetooth
On
Device name
Notepad_K10
Pair new device
When Bluetooth is turned on, your device can communicate with other nearby Bluetooth devices.
10