Publicité
Les langues disponibles
Les langues disponibles
FPV-Set 5.8 GHz Rocket 400 GPS
Charge the battery only with the included charger. During
charge the battery LED lights red, when the battery is fully
cherged blue. Charging time is approx. 90 minutes.
2. Operation
• Make sure that the camera and monitor battery is fully charged.
• Switch the camera on. Now activate the TV-Out option, refer to the manual of the camera. Make all other
settings such as video resolution, image rotation, etc. before the start.
• Connect the AV cable to the camera. Note: the camera screen will go off with activated TV-Out.
• Insert the fl ight battery and connect to the Rocket 400. The LED of the 5.8 GHz video transmitter lights
up red.
• Switch on the transmitter, then press the POWER button of the monitor to switch the monitor on.
• Have fun fl ying with fi rst-person view.
3. Frequency selection 5.8 GHz transmitter
The transmitter and monitor operates in the 5.8 GHz band. There are 3 bands with a total of 22 channels
available, which are selected via DIP switch. At factory state, the channel is preset so that you can start im-
mediately. If a frequency change be necessary, proceed as follows:
Channel (DIP-switch)
CH
CH1
CH1
CH2
Group
A
5865MHz 5845MHz 5825MHz 5805MHz 5785MHz 5765MHz 5745MHz
B
5733MHz 5752MHz 5771MHz 5790MHz 5809MHz 5828MHz 5847MHz 5866MHz
D
5740MHz 5760MHz 5780MHz 5800MHz 5820MHz 5840MHz 5860MHz
FPV-Set 5.8 GHz Rocket 400 GPS
CH3
CH4
CH5
Switch the monitor on and start the channel SEARCH.
CH6
CH7
CH8
EN
7
Publicité
