Table des Matières
Publicité
Transporting
IMPORTANT! LXT95 Log Loader / Trailer is not intended for
use or transport on public roadways. Therefore, it does not
include the required lights, reflectors, and markings.
Equipment that is transported on a public roadway must
comply with local laws that govern the safety and transport
of machinery.
Before taking this machine on a public roadway, make sure
it has the lighting, reflectors and markings required by your
local transportation authority. Make sure they are in good
working order.
Transporting Safety
• Comply with state and local laws governing safety and
transporting of machinery on public roads.
• Check that all the lights, reflectors and other lighting
requirements are installed and in good working condition.
• Do not exceed a safe travel speed. Slow down for rough
terrain and cornering.
• Place the boom and bucket in safe position before moving
or transporting.
• Do not drink and drive.
• Be sure the trailer is hitched positively to the tractor and a
retainer is used through the drawbar. Always attach safety
chains between the hitch and the tractor.
• Be a safe and courteous driver. Always yield to oncoming
traffic in all situations, including narrow bridges,
intersections, and so on. Watch for traffic when operating
near or crossing roadways.
• Never allow riders on the machine.
• Review the transport safety section of the LXT Log Loader
operator's manual.
BA201
Trailer mount
1. Be sure the trailer is hitched positively to the vehicle and a
retainer is used through the drawbar.
2. Maneuver the boom and rest the bucket in the dump box /
trailer.
3. Install the boom swing pin and secure with its retainer.
4. Retract the drop leg jack.
5. Do not exceed maximum load capacity:
• LT 30 – 5000 lb (2267 kg)
• LT 60 – 10,000 lb (4536 kg)
6. When transporting by highway, make sure a SMV sign is
attached, and reflectors are installed and in good working
condition.
7. Check that trailer brakes (if equipped) are functioning
properly.
8. Check your tow vehicle can accept ball hitch size (LXT95 –
2", LXT115 – 2-5/16"). Install retainer through the ball hitch
latch.
9. LXT115 articulating drawbar: make sure drawbar is straight
and drawbar pin is installed.
Fig. 12 – Trailer-mounted Boom
10
Publicité
Table des Matières
