Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 fixing brackets
- 2 plastic washers Ø6
- 2 steel washers Ø6 L
Fitting
- Remove the saddle from the motorbike.
- Put of the original strap by unscrewing both nuts under the saddle. Keep the nuts.
- Place the threaded fasteners on the fixing brackets as below :
- Fit the fixing brackets by inserting plastic spacer and steel washer as below :
- Refit the saddle and put the Ermax seat cover.
- Fix the Ermax seat cover thanks to both screws 6x15 and both plastic washers Ø6.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of
our painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
- 2 threaded fasteners Ø6
- 2 screws BHc 6x15 big head black
- 2 plastic spacers Ø10 int. Ø20 ext. th. 5 mm
Threaded fastener
Fixing brackets
God fitting
FITTING INSTRUCTIONS
ADAPTABLE ON MSX 125 2013 → ∞
Steel washer Ø6
Plastic spacer Ø10
Bad fitting
« CAUTION »
ERMAX SEAT COVER
Estimated fitting instructions : 20 min
Publicité
