Application And Function - RODCRAFT RC7681K Manuel

Dear customer!
Rodcraft Pneumatic Tools GmbH thanks you for the purchase of one of our products and invites you to reading this user manual.
All necessary information for an adequate use of the purchased equipment is contained herein: it is advisable to read everything from cover to cover and to
observe the references.
Please keep the user manual in good order. The contents of this manual may change without prior notice and without further obligations, so that changes
and improvements can be inserted into already distributed copies.
It is our aim to manufacture products, with which you can work as safe and effi cient as possible. Most important for your safety are your caution and
judgment in handling this product and other tools. These safety precautions contain some of the important sources of danger; however, they cannot cover all
possible risks.
Without prior written permission of the manufacturer copying or translation of any part of this manual is prohibited.

2. Application and Function

• A sander is a tool used for smoothing and removing material from surfaces by means of sandpaper in order to achieve a desired fi nish.
• A sander should only be used to smooth surfaces with sandpaper and must never be used in any other way.
• Do not misuse the sander.
• Please read the product safety information carefully!
3. Inspection – Scope of Delivery
Open the packing and check the equipment for transport damage and that all parts specified in the shipping documents are at hand. Before using the
equipment conduct a visual inspection in order to determine leakages,
damages, loose or missing parts.
Scope of delivery:
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
2 x
2 x
2 x
2 x
2 x
2 x
RC7681K
Smart Repair surface finishing sander
Wrench 12/17 mm
Dehumidifi er packet
User manual
Safety instructions
EC Declaration of Conformity
Spare part list
3" Back-up pad/Roloc adapter 1/4-20UNC
2" Back-up pad/Roloc adapter 1/4-20UNC
3" Sandpaper sheet, grain 60
3" Grinding disc, medium (blue)
3" Grinding disc, rough (brown)
2" Sandpaper sheet, grain 60
2" Grinding disc, medium (blue)
2" Grinding disc, rough (brown)
RODCRAFT PNEUMATIC TOOLS GmbH
EN
RC7681
1 x Smart Repair surface finishing sander
1 x Wrench 12/17 mm
1 x Dehumidifi er packet
1 x User manual
1 x Safety instructions
1 x EC Declaration of Conformity
1 x Spare part list
7