Record Function - Fenton FT208LED Manuel D'instructions

BT CONNECTION
1. Activate the BT on your device (Mobile phone, tablet etc.) which you want to play the music.
See the operating instructions for that device.
2. Press the "MODE" button and activate the BT-function.
3. Select "FT208" on your BT device and pair.
Attention: BT distance is approx. 10meter without any barrier.

RECORD FUNCTION

Record
First, insert a USB of TF drive intro the speaker. Second, you can use the record function when you push the ''REC'' button for 3
seconds, the speaker will start recording. Press the REC button again to stop recording, It will save the mp3 at your USB or TF
card.
Playback
In USB/TF mode, Press and hold Play "Rec button" for 3 sec to enter playback, Press ">>|" or "|<<" button to navigate stored
record, Press and hold "Repeat" button for 3 sec to delete record.
NOTE: USE A USB STICK WITH A MAXIMUM OF 16GIG AND FORMAT THE USB/TF DRIVE TO FAT-32 FILE SYSTEM.
MIC PRIORITY:
Mic Priority button; press to turn on or off the microphone priority; the music will be automatically turned down when you speak
through the microphone
4