Snooze Function; Sleep Operation; Dimmer Control - SOUNDMASTER UR105WE Mode D'emploi

Normal → ALARM 1 Hour → ALARM 1 Min → ALARM 1 weekday Alarm → ALARM 1 wake beep
→ ALARM 1 wake radio → ALARM 1 wake radio volume →Normal.
Normal → ALARM 2 Hour → ALARM 2 Min → ALARM 2 weekday Alarm → ALARM 2 wake beep
→ ALARM 2 wake radio → ALARM 2 wake radio volume →Normal.
Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
Action (during data adjustment):
Press << / Tune - (3) button to adjust data backward.
-
Press >> / Tune + (4) button to adjust data forward.
-
Keep depressed << or >> button for 2 seconds to enable auto forward.
-
Use ALARM 1 / ALARM 2 set button to confirm each setting.
-
ALARM
Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will stop
automatically and wait for same alarm time on next day.
ENABLE / DISABLE THE ALARM
Press and hold the "ALARM 1" (1) / "ALARM 2" (2) button to enable or disable the alarm. Once the
alarm is activated, the bell symbol will be appeared on the display.

SNOOZE FUNCTION

When Alarm rings, press Snooze button (7) to suspend the alarm & to activate the snooze
function, Beep or Radio alarm will stop and the alarm will ring again 9 minutes later. Press
SNOOZE key again, alarm will be suspended again, another 9 minutes later the alarm will ring
again and so on until the next alarm rings.
Note: The interval time of the Snooze function is 9 minutes.
- If you want to disable the SNOOZE function and stop alarm completely, press Radio ON/OFF
button (6). If you don't press any button, the alarm will ring during 30 minutes & stop
automatically.
- Icon of ALARM 1 and ALARM 2 will blink as long as Snooze function is still operating. Once
Snooze is turned off icon of ALARM 1 / ALARM 2 stop blinking and lights on the display.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER (7) button to enter into the
sleep mode. You can adjust the sleep timer from 90 minutes to 15 minutes by pressing repeatedly
the SNOOZE/SLEEP/DIMMER button (7). When sleep timer is selected, the unit will automatically
turn off once time is up.

DIMMER CONTROL

The dimmer button (7) allows you to set the brightness of the LCD display to high, medium and off
3 levels.
Remark: It will consume more power if you set the clock display with dimmer high.
UR105 / English Instruction Manual
.
3