Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 plastic spacers Ø ext 20mm, Ø int 10mm, thickness 5mm
Fitting
- Remove the original screen.
- If necessary, for a mounting of the Ermax screen to your convenience : get the upper spacers back (if
there are any original) and insert them on the down fixing points, between the support and the Ermax screen.
The provided spacers are going in this case on the upper fixings, between the support and the Ermax screen.
If the motorcycle is kitted out in rubber silent blocks, get them back and put them on the Ermax screen.
- Fix the Ermax screen with the original screws.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
FITTNG INSTRUCTIONS
ERMAX SCREEN ADAPTABLE
« CAUTION »
ON BMW R 1200 GS 2013 → ∞
Estimated fitting time : 20min
Publicité
