Technical Support - Eclipse SEE2 Xtreme UV250 Guide D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Mac Software installation

Step 1:

Insert the CD into the drive and double-click the

installer application.

Step 2:

Follow the on-screen installer directions.

Step 3:

When the installer has completed, click restart to

reboot the computer.

Mac hardware installation

Step 4: Plug the small end of the USB cable into the SEE2 Xtreme UV250

and the larger end of the USB cable into an available USB port on

the computer.

Step 5: Connect the DVI (or VGA cable using the included adapter)

to the SEE2 Xtreme UV250. Open "System Preferences" and

click on "Displays" adjust resolution, orientation, and mode.

You are now ready to use your SEE2 Xtreme UV250!

2-Year limited Warranty

Mad Catz warrants this product to be free from defects in materials and workmanship for the warranty period. This non-

transferable, two (2) year limited warranty is only valid for the original purchaser. If a defect covered by this warranty occurs

AND you have registered your product with Mad Catz AND you provide proof of purchase, Mad Catz, at its option, will repair

or replace the product at no charge.

[5]

All manuals and user guides at all-guides.com

The Mad Catz two (2) year limited warranty is available to North American and European customers. Your sole and exclusive

remedy is repair or replacement of your Mad Catz product. In no event shall Mad Catz liability exceed the original purchase

price of the product. This warranty does not apply to: (a) normal wear and tear or abusive use; (b) industrial, professional or

commercial use; (c) if the product has been tampered with or modified.

technical Support

Online Support and User Guides: www.eclipsetouch.com

North American telephone: Available 8 A.M. to 4 P.M. Pacific Standard Time, Monday through Friday (excluding

holidays) at 1.800.659.2287 (US only) or 1.619.683.2815 (outside US)

European E-mail: techsupporteurope@madcatz.com

European telephone: Available 9 A.M. to 5 P.M. Greenwich Mean Time, Monday through Friday

(excluding bank holidays) at +44 (0) 8450-508418

CAUTIONS

Use this unit only as intended.

To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not use within 30' of any water such as swimming pools, bathtubs, or sinks.

To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only.

Never insert objects of any kind, other than authorized items, into the product as they may touch dangerous voltage points or short out parts that could result in fire or electrical shock.

Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands and/or arms while operating the unit. If the condition persists, consult a doctor.

Do not attempt to operate the unit in any way except with your hands. Do not bring the unit in contact with your head, face, or near the bones of any other part of your body.

Avoid prolonged use of this unit. Take breaks every 30 minutes.

Route all cords so that they are not likely to be walked on or tripped over. Make sure that cords are not placed in a position or areas where they may become pinched or damaged.

Do not wrap cords around any part of anyone's body.

Do not allow children to play with cords.

United States and Canada:

As required, certain of these class B digital devices have been tested by Mad Catz, Inc., 7480 Mission Valley Road, Suite 101, San Diego, CA 92108, and found to comply with part 15 of the FCC rules

and the Canadian RSS-210 which sets forth limits designed to provide reasonable protection against harmful interference in a residential installation. These device(s) use, generate and can radiate

radio frequency energy and, if not assembled, installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interfer-

ence will not occur in any particular location or use. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Exposure to Radio Frequency Radiation:

The radiated output power of the controller is well within FCC radio frequency exposure limits for this type of device when unaltered and used as described in our instructions and the controller

operates within guidelines found in radio frequency safety standards, which reflect the consensus of the scientific community and therefore, the manufacturer believes the device's internal wireless

radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However, the use of wireless radios

may be restricted in some situations (e.g., on airplanes). If you are unsure of restrictions that may apply in any situation, you must ask for authorization before turning on, connecting or using the

controller.

EU DECLARATION OF CONFORMITY:

As required, certain of these products have been tested and conform to the requirements of the European Union Directives 2002/95/EC, 2002/96/EC, and 2004/108/EC. Authorized signatory of the

manufacturer is Mad Catz, Inc., 7480 Mission Valley Road, Suite 101, San Diego, CA 92108.

its affiliated companies. The shape and design of this product are a trade dress of Mad Catz and/or MCIA. Covered by U.S. Patent No. 7,203,788. Microsoft, Windows, and the Windows logos

are trademarks of the Microsoft group of companies. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. This product is not sponsored, endorsed

features, appearance and specifications may be subject to change without notice. Please retain this information for future reference.

[6]

Table des Matières

Produits Connexes pour Eclipse SEE2 Xtreme UV250

Eclipse SEE2 Xpress Dock XD300