Installing I-Storm Usb Adsl Modem - Atlantis Land I-Storm USB Manuel

PPPoE
VPI/VCI,
Username, Password, Service Name, and Domain
Name System (DNS) IP address (it can be
automatically assigned from ISP or be set fixed).
PPPoA
VPI/VCI, VC-based/LLC-based multiplexing,
Username, Password, and Domain Name System
(DNS) IP address (it can be automatically assigned
from ISP or be set fixed).
RFC1483
VPI/VCI, VC-based/LLC-based multiplexing
Bridged
RFC1483
VPI/VCI, VC-based/LLC-based multiplexing, IP
address, Subnet mask, Gateway address, and
Routed
Domain Name System (DNS) IP address (it is fixed
IP address).
VPI/VCI, IP address, Subnet mask, Gateway
IPoA
address, and Domain Name System (DNS) IP
address (it is fixed IP address).

1.5 Installing I-Storm USB ADSL Modem

Please refer to the following instructions:
♦ Connect ADSL telephone cable to the LINE RJ-11
jack.
♦
Connect the USB cable to the USB port and connect
the other end to the PC.
VC-based/LLC-based
ENGLISH
multiplexing,
32