Initial Operation; Switching On The Headset; Directions For Charging Rechargeable Batteries - Conrad Electronic BT25II Mode D'emploi

All manuals and user guides at all-guides.com

Initial Operation

Charging the Integrated Rechargeable Battery
The headset is equipped with a rechargeable lithium polymer battery. Charge the headset with
the supplied charger for approx. 3 hours before using it for the first time.
To charge, please attach the supplied charger to the „charging connector" (3).
The „Status LED" (5) is lit red during the charging process.
Charging takes about 3 hours.

Switching on the Headset

To switch on your headset, hold down the „multifunction button"(4) for 3 seconds.
Repeat this procedure if you wish to switch off the headset.

Directions for Charging Rechargeable Batteries

This headset emits a beep-tone warning and the „Status LED" (5) flashes red when your bat-
tery requires recharging.
If you attach your headset to the charger while it is switched on, it will automatically switch itself
off. You can restart the headset by pressing the „multifunction button" (4).
21