Location And Function Of Parts And Controls; Front Panel - Sony KLH-40X1 Mode D'emploi

Location and Function of Parts and Controls

Front Panel

MENU
1 MENU (page 18)
/ (INPUT)
2
• In the menu screen, this button works as the "Set"
button.
• This button works to switch the input signal when it
is not in the menu screen.
Selects an input signal from among the HD15/
HDMI 1/HDMI 2/VIDEO connectors.
/
3
In the menu screen, these buttons work as left/right
buttons ( ).
/
/ /
4
• Increases (+) or decreases (–) the volume.
• In the menu screen, these buttons work as up/down
buttons ( / ).
5 1
Switches the display on/off (standby).
Note
To protect the panel, a certain amount of time is
required to turn the display to on/off (standby). When
you turn the display on again, soon after turning it off,
wait about 5 seconds before you turn it on again.
6 PIC OFF indicator
Lights up in green when "Picture Off" function of
"ECO Mode" is selected.
7 STANDBY indicator
Lights up in red when the display is in standby mode.
8 POWER indicator
Lights up in green when the display is switched on.
Remote control sensor
9
GB
9
GB