Ryobi PRT100 Manuel D'utilisation page 2

Figure
NOTE: After use with organic material, proper cleaning and sanitizing of the tool/bit is required. Any material including
organic material cut or altered by this tool is not intended nor suitable for human consumption.
Qty Accessory
1 1/4 in. Drum Sanding Mandrel
1/4 in. Pointed Aluminum Oxide
1
Grinding Stone
1 1/8 in. Screw Mandrel
(2) 1/4 in. 60 Grit Sanding Band
4
(2) 1/4 in. 120 Grit Sanding Bands
(2) 1/2 in. Felt Polishing Wheels
3
(1) 1 in. Felt Polishing Wheels
1 Polishing Compound Vial
1 Carbon Steel Brush
3/32 in. Diamond Wheel Point
1
Engraving Cutter
1 1/8 in. High-speed Cutter
1 1/16 in. Engraving Bit
1 Wrench
ENGLISH
ACCESSORY TABLE
Application
Holding sanding drums
Sharpening and deburring
metals, steel, and rust
Holding polishing wheels
Sanding wood, metal, and
plastics
NOTE: When using with
organic material, material must
be completely dry before use.
DO NOT use sanding bands on
wet or moist organic material.
Polishing and buffing metals,
stone, glass and ceramics
Used with felt polishing wheels
to polish metal and plastic
Cleaning and deburring metal,
rust and paint
NOTE: NOT suitable for
organic material.
Engraving metal, wood,
plastics, and organic material
Engraving metal, wood,
plastics, and organic material
Engraving metal, wood,
plastics, and organic material
Changing accessories on
collet
MAX
RPM
35K
35K
15K
35K
15K
N/A
15K
35K
35K
35K
N/A