Digital Teletext (For Uk Only) - Telefunken D48F275A3C Mode D'emploi

Getting Started
Remote Control
Teletext
Press TXT button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.

Digital Teletext (for UK only)

Press TXT button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the TXT button is pressed again, the TV returns
to television broadcast.
1. Standby
2. Numeric buttons
3. TV-AV / Channel List / DVB-T
4. Volume up/down
5. Mute
6. Navigation buttons
7. Menu on/off
8. OK / Channel List
9. Return/Back
10. Internet browser
11. Media Browser
12. My button 1 (*)
13. Coloured Buttons
14. Mono-Stereo Dual I-II / Audio-Subtitle Language
15. Subtitle on-off / Subtitle (in Media Browser
mode)
16. Rewind (in Media Browser mode)
17. No Function
18. Play (in Media Browser mode)
19. Stop (in Media Browser mode)
20. Pause (in Media Browser mode)
21. Fast Forward (in Media Browser mode)
22. Image size
23. Teletext
24. My button 2 / Channel network type (**)
25. Electronic Programme Guide
26. Exit
27. Quick menu
28. Info
29. Programme Up-Down
30. Previous programme
31. AV / Source selection
Using My button 1 (*)
This button's main function is to run Youtube link. However, if
you want to change this function, you can press MY BUTTON 1
for five seconds when on a desired source, channel or link, until
the "MY BUTTON IS SET" message is displayed on the screen.
This confirms that the selected MY BUTTON is now associated
with the selected function. Note that if you perform first time
installation, MY BUTTON 1 will return to its default function.
Using My Button 2 (**)
This button's main function is to switch between DVB-T,
DVB-C and DVB-S broadcasts. However, if you press MY
BUTTON 2 for five seconds, you can set a function to it as
described in My Button 1.
Note that if you perform first time installation, MY BUTTON 2
will return to its default function.
English - 30 -