Conformity Of The Product With Legislation; Storage Of The Manual; Use Of The Product / Installation; Operating The Product - LED's work NOVALIGHT 360 Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit
during operation and keep it out of reach of children or animals. This product is not a toy,
make sure the product is standing on a stable surface and always spread out the legs as far
possible. Fasten all screws handtight. LED lights are extremely bright and looking directly at
the light source during operation can lead to serious eye damage. Any other use of the device
than described in the manual may damage the product or cause danger to the user, e.g. due
to a short circuit, fire or electric shock. The safety instructions must be observed at all times!

06 Conformity of the product with legislation

The warranty expires in the event of damage due to non-compliance with the safety in-
structions of the device. Furthermore, we are not liable for consequential damage, damage
to objects or persons resulting from failure to observe the safety instructions and improper
use/handling of the device due to wear and tear. Product design and specifications are sub-
ject to change without notice. All logos and trade names are registered trademarks of their
respective owners and are hereby acknowledged as such.

07 Storage of the Manual

Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the commission-
ing and handling of the device. Keep all enclosed operating instructions for future reference.
If the device is sold or passed on to third parties, you are obliged to pass on the operating
instructions as these are lawfully part of the product.

08 Use of the product / Installation

Before use, check the completeness of the parts supplied and the intactness of the product. If
damaged, it must not be put into operation.
Installation:
1. Unfold the feet of the tripod as far as possible and tighten the screw.
2. Put the Parachute floodlight on the Tripod and tighten the screw.
3. Connect the supplied cable on the Parachute floodlight and tighten the connector.
4. Move the Parachute in the right direction (see fig. 1)
5. Put the telescopic handle on the right hight and tighten the screw of the telescopic handle.
6. 6. Check the complete installation and put the plug in the socket.

09 Operating the product

The safety instructions and warnings must be observed to ensure both the perfect condition
of the product and safe operation.

10 Product maintenance

The Novalight 360° can be cleaned with clear water and a soft cloth. Do not use detergents
containing surface active agents or scouring agents.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

300740

Table des Matières