Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Intended use
Your BLACK+DECKER™ SM1000 stand mixer has been
designed for mixing, suitable food ingredients. This
appliance is intended for indoor household use only.
This appliance is not intended to be used in:-
•
Staff kitchen areas in shops,Offices and other working
environments;
•
Farm houses,
•
By clients in hotels, motels and other residential type
environments;
•
Bed and breakfast type environments or any other
non-household environments.
In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility
Safety instructions
•
Warning! When using mains-powered appliances, basic
safety precautions, including the following, should
always be followed to reduce the risk of fire, electric
shock and personal injury.
•
Read all of this manual carefully before using the
appliance.
•
The intended use is described in this manual. The use of
any accessory or attachment or the performance of any
operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
•
Retain this manual for future reference.
Using your appliance
•
Always take care when using the appliance.
•
Misuse could cause injury.
•
Do not use the appliance outdoors.
•
Do not operate the appliance if your hands are wet. Do
not operate the appliance if you are barefoot.
•
Guide the power supply cord neatly so it does not hang
over the edge of a work top and cannot be caught
accidentally or tripped over.
•
Keep loose clothing, hair, etc. away from moving parts.
•
Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
•
If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
•
Switch off the appliance and disconnect from the supply
before changing accessories or approaching parts that
move in use
4
(Original instructions)
•
Disconnect the appliance from the power supply when
not in use and before changing accessories, cleaning,
etc.
•
Do not immerse the appliance, cord set or plug in water
or any other liquids.
Safety of others
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance..
After use
•
Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
•
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
•
Before use, check the appliance for damaged or
defective parts. Check for breakage of parts, damage to
switches and any other conditions that may affect its
operation.
•
Do not use the appliance if any part is damaged or
defective.
•
Have any damaged or defective parts repaired or
replaced by an authorised repair agent.
•
Before use, check the power supply cord for signs of
damage, ageing and wear.
•
Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
•
If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
•
Before use, check the power supply cord for signs of
damage, ageing and wear.
•
Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
•
If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
Publicité
