Nederlands - Audizio SB80 Manuel D'instructions

1. Ensure that the files stored on the flash drive are in MP3 format.
2. Insert the USB/TF flash drive in the designated USB/TF slot on the back of the device.
3. Press the mode key repeatedly until USB/TF mode has been reached (the LED indicator will flash in red color).
4. Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.
An HDMI (ARC) cable is needed (not included).
1. Connect one end of the HDMI(ARC) connecting cable to the HDMI output of the source device and the other end to the
HDMI input of the soundbar.
2. Press the mode key repeatedly until HDMI mode has been reached (the LED indicator will emit green color).
3. Make sure the source audio is set to HDMI settings.
4. Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.
A 3.5mm audio connecting cable is needed (included).
1. Connect one end of the 3.5mm connecting cable to the line output (AUX) of the source device and the other end to the
line input (AUX) of the soundbar.
2. Press the mode key repeatedly until line mode has been reached (the LED indicator will blink slow in green color).
3. Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.
An optical connecting cable is needed (included).
1. Connect one end of the optical connecting cable to the according output of the source device and the other end to the
optical input of the soundbar.
2. Press the mode key repeatedly until the optical mode has been reached (the LED indicator will flash in green color).
3. Make sure the source audio is set to OPT settings.
Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.
1. Press the mode key repeatedly until BT mode has been reached (the LED indicator will emit blue light).
2. Turn on the BT function on your source device and search for "SB80" to pair. When the pairing has been successful, the
soundbar will emit a sound to indicate the successful pairing.
3. Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.
6