Before Returning For Repairs (U.s./Canada); Disposal Information - Schumacher Electric SL1391 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Smart Cable LED and Alarm Behavior
BEHAVIOR
Green LED flashing
Green LED solid
(with clicking sound)
Green LED solid
Red LED lit (no alarm)
Red LED lit; long buzzer alarm
NOTE: Disconnect and reconnect the smart cable to reset.

12. BEFORE RETURNING FOR REPAIRS (U.S./CANADA)

www.batterychargers.com or call 1-800-621-5485
For REPAIR OR RETURN, contact Customer Service at
1-800-621-5485. DO NOT SHIP UNIT until you receive a
RETURN MERCHANDISE AUTHORIZATION (RMA) number
from Customer Service at Schumacher Electric Corporation.
When returning an item, place the original package into a shipping
carton. If you received an emailed label from Schumacher, please
print the label and tape it to the carton. Only ship via insured
ground service with a tracking number. Return shipping
charges are the responsibility of the customer. We cannot accept
C.O.D. deliveries and are not responsible for lost or damaged
packages. Please do not place stickers or shipping labels on the
original manufacturer's package. Please allow 2-3 days from date
we received the package for us to process your return. All return
shipping charges must be prepaid.

13. DISPOSAL INFORMATION

return and collection systems or contact the retailer where the product
was purchased, for environmentally-safe recycling.
For information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
Do not dispose of this product with other household waste.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, and to promote
the sustainable reuse of material resources, recycle it
responsibly. To discard your used device, please use the
Ready to connect the smart cable to
the jump starter, and ready to connect
the clamps to the vehicle.
Detecting the condition of the vehicle
and jump starter.
Ready to jump start the vehicle. After
jump start, disconnect the clamps.
Voltage is too high or too low for
starting a vehicle.
The connection is reversed.
Short circuit protection.
Overload protection.
• 12 •
REASON

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sl1398Sl1399

Table des Matières