Chattanooga Group Theratherm Mode D'emploi page 10

OPERATION
8. To lock the desired settings, press and hold the "SELECT" button for 2-seconds until an audible tone is heard.
A "key" icon is displayed on the LCD to indicate the unit is locked (A). To change settings, unlock the unit by
pressing and holding the "SELECT" button for 2-seconds until the audible tone is heard. The "key" icon on the
LCD display will disappear.
9. At anytime during therapy, a momentary press of the "ON-OFF/STATUS" button provides a real-time review of
parameters and access to parameter changes (B).
10. Average treatment time is 20 to 30 minutes. It is not recommended to exceed 30 minutes of use in one
therapy session.
11. At the end of set treatment time, unit will automatically power off.
NOTE: At anytime during therapy, pressing the "ON-OFF/STATUS" button for 2-seconds or more will switch
power OFF. At the end of treatment it is recommended to unplug the unit from the wall outlet.
12. If Malfunction icon is displayed on the LCD (C), an audible tone will continue for 5 seconds and heat output is
automatically turned off. Unplug the unit and contact your distributor for appropriate action.
NOTE: Launder the flannel pad cover as needed. (see Maintenance Section)
Replace flannel pad cover when worn, scorched, discolored or holes develop in the fabric.
Contact you Theratherm distributor for replacement flannel pad covers.
Theratherm™ Digital Moist Heating Pad
10
A. Lock
B. Real-time
C. Malfunction