Setup; For Bluetooth® Enabled Smartphones; Using A 3.5Mm Auxiliary Audio Cable - Fluance Fi30 Manuel D'instruction

SETUP

1
USB CHARGING
DC 5V 2.1A
2a
Bluetooth®
2b
AUX
USB CHARGING
DC 5V 2.1A
USB CHARGING AUX IN
DC 5V 2.1A
*Bluetooth is disabled when 3.5mm Auxiliary Audio Cable is plugged into
AUX IN input
POWER
ON
OFF
AUX IN POWER
RESET PAIRING
ON
OFF
FLUANCE Fi30
Fluance Fi30
BLOOP!
Optimal Audio Performance
AUX IN
RESET PAIRING
POWER
RESET PAIRING
ON
OFF
For Bluetooth® enabled Smartphones
1. Go to SETTINGS
2. A list of Bluetooth devices will appear.
3. Select "Fluance Fi30".
4. Click YES if asked to connect.
5. You will hear "BLOOP!" when connected and the
Power LED will glow brightly.
6. You can now control your music using your
Smartphone. The "Bluetooth Active" icon will appear
on the main screen when connected.
TO DISCONNECT
1. Go to SETTINGS
2. A list of Bluetooth devices will appear.
3. Select "Fluance Fi30".
4. Select YES if asked to disconnect.
5. You will hear "BLOOP!" when disconnected.

Using a 3.5mm Auxiliary Audio Cable

1. Connect one end of the 3.5mm Auxiliary Audio Cable
to the AUX IN input on the Bluetooth
Music Receiver.
2. Connect the other end of the 3.5mm Auxiliary Audio
Cable to the Headset Input on your Smartphone/
POWER
Audio Device.
ON
3. The Power LED will glow brightly.
OFF
4. You can now control your music using your
Smartphone/Audio Device.
The Power LED glows dimly when not
- 6 -
to turn on Bluetooth.
then to your Bluetooth settings.
connected to an audio device.