Hathaway VICTORY Instructions D'assemblage page 4

ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
ASSEMBLY INSTRUCTIONS
3. Unlock and unfold pre-assembled table and slide "T" rolling leg into designated position.
WARNING: This table is shipped with safety lock in locked position. To prevent damage
to table ALWAYS disengage lock before opening legs. ALWAYS open legs by lifting outer
legs (hinged side), NOT "T" rolling leg side. Lifting "T" legs first can damage hinges.
5. Install one wheel washer onto each wheel stem and then screw wheels onto legs as shown.
6.Tighten all screws and carefully turn table over, ready for use.
Figure 1
Bolts Washers Lock Nuts
4