ASSEMBLY INSTRUCTIONS (CONT.)
FIG. 11
X 1
X 8
X 4
X 4
X 2
FIG. 12
NOTE: Control Box Wire must
be plugged into Electronic
Scorer and Controller turned
on, along with Electronic
Scorer, for Scorer to work.
Scorer will NOT work until
this is done.
1. Slip elastic strap
over top leg (1)
2. Secure elastic strap
over bolt (26) end sticking
out on back
When net is OPEN, pin goes in front hole.
NOTE: Pin fits tight, so you may need to
jiggle frame slightly to get holes to line up.
11