CRAFT+MAIN LED2436-RT Guide D'installation Et D'utilisation page 5

MIRROR INSTALLATION
SUPPORT LOCATION
Mark the drill locations based on vertical or horizontal mounting, making sure that the markings are level.
When determining the locations, it is recommended that the screw for at least one bracket be drilled into a stud.
3⅜"
5½" 5½"
1 ⁄ " 1 ⁄ "
INSTALL MOUNTING BRACKETS
When mounting into sheetrock or hollow walls, make holes with a drill and fill with supplied plugs. Install mounting bracket.
STEP 1
STEP 2
STEP 3
5