Zennio IDAC Manuel D'installation page 16

ANNEX A – BATTERY REPLACEMENT
1
Remove the cover by unscrewing the three
screws.
4
Finally, fix the cover by means of the three screws.
* Note: Images show the assembly for a left-hand door. For right-hand doors the assembly is symmetrical.
(See https://www.zennio.com/download/idac_technical_note_door_direction_din_107_en for left-hand/right-
hand description).
© Zennio Avance y Tecnología S.L.
2
Remove the battery from its housing.
Ed. 3 Further info:
3
Insert the new battery making sure not to
damage the connection.
www.zennio.com Page 8 / 8