Installation Instructions - Bradley Halo S19314 Serie Installation

Installation
1 Assembly — Connect Base and Eyewash
Standard eyewash unit is shown. Other units are similar.
Connect components before securing the base to the floor. When connecting
components, use the rubber grip pad (provided) around pipes to prevent marring.
Apply pipe sealant (supplied by installer) to all male-threaded pipe joints, making
sure not to get any excess over the edge of the pipes.
Halo unit with standard
drain option
(3) Ø ⁄ " (10mm) holes on
3
8
Ø 8" (203mm) bolt circle
Bradley Corporation • 215-1684 Rev. G; ECM 12-05-016
20½"
(521mm)
pipe length
1¼" NPT
drain outlet
For optional foot pedal
installation, the base
must be positioned
so that the hole in the
base is perpendicular
to the user.
³⁄₈" bolts and anchors
supplied by installer.
Halo unit with 24"
drain option
5/2/2012
S19314
1¼" NPT
drain outlet
12¾"
(324mm)
pipe length
7