Publicité
Les langues disponibles
Les langues disponibles
1. Be sure the gooseneck ball is secure and functioning properly and freely rotates in the gooseneck
receiver.
2. Lubricate gooseneck ball before use.
3. Verify adequate turning clearance between truck cab and corner of trailer
4. Verify safety chains are secure before towing
5. Verify that the trailer weight does not exceed tow vehicle & gooseneck capacity
y
6. Verify brake lights & trailer brakes & brake away switches work properly
7. Perform a tug test on the truck and trailer before towing:
- Connect and test power cables, attach emergency brake cable. With Trailer Landing Gear down, wheels chocked and the
trailer brakes SET ON slowly pull forward to check security of gooseneck. Recheck connections
- Remove the wheel chocks from the wheels of the 5th Wheel Trailer; Raise Trailer Landing Gear and double check that
the hitch is properly attached to your tow vehicle.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information/
Tech Support. ©2016 DTS Manufacturing All Rights Reserved . April 13, 2017‐Rev2 Page‐2
HANDLE UP AND ROTATED
IN THE UN-LOCKED
POSITION
INSTALL GOOSENECK INTO
RECIEVER PORTION OF TRUCK
TRUCK
BED
RECIEVER PORTION
OF TRUCK
Prior to Towing
g
GOOSENECK INSTALL IN RECEIVER
PORTION OF TRUCK
TRUCK
BED
g
p
y
HANDLE DOWN
AND IN THE
LOCKED
POSITION
HANDLE MUST
BE BELOW THE
BALL PROFILE
BEFORE
COUPLING TO
TRAILER
Publicité
