Dometic GROUP WAECO CoolMatic CRF-50 Notice D'utilisation page 30

Using the freezer
Defrosting the freezer
Humidity can form frost in the interior of the freezer or on the vaporiser. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
Caution!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
This is how to defrost the freezer:
➤ Take the contents out.
➤ If necessary, put them in another cooling appliance.
➤ Set the knob to "0".
➤ If your device has a coolant accumulator (RPA, RSA models):
Disconnect the device from the voltage supply.
The defrosting process can take longer due to the accumulator.
➤ Leave the door open.
➤ Wipe off the water resulting from defrosting or – if present – empty the col-
lecting tray. If your device has a water drain, drain the thawed water off.
Switching off and storing the freezer
If you do not intend to use the freezer for a long time, proceed as follows:
➤ Set the knob to level "0".
➤ Disconnect the power cable from the battery or pull the DC cable plug out
of the rectifier.
➤ Clean the freezer (see chapter "Cleaning and maintenance" on page 31).
➤ Set the lock to the "VENT" position.
This prevents odours from forming.
Securing the freezer door
You can prevent the freezer door from being opened inadvertently.
➤ Put the locking mechanism on the top of the door to position 1
(fig. 4 1, page 4).
30
CoolMatic CRF-50