Assembly Tips & Warnings - Blue Wave Great Bear Manuel De L'utilisateur

ASSEMBLY TIPS & WARNINGS
• Before you begin, read all assembly instructions and safety warnings carefully.
• This sauna requires at least 3 adults to complete assembly.
• Remove all of the contents from boxes and verify that you have all of the parts shown on the Parts
Identifier before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
• This manual is used for the assembly of several sauna models; therefore, some figures or drawings
may not look exactly like your product.
• Cover the sauna floor during assembly to avoid staining the unfinished wood surface.
• Retain this Owner's Manual for future reference.
ELECTRICAL REQUIREMENTS
• We recommend consulting a licensed electrician and checking local ordinances before installing
ANY sauna.
• Four-Person Models require a 20 amp receptacle and a 20 amp circuit breaker. Note: Electrical modi-
cations may be required to accommodate 20 amp power.
• Six-Person Models require a dedicated 220V line that should ONLY be installed by a licensed electri-
require a dedicated 220V line that should ONLY be installed by a licensed electri
cian.
• Refer to the serial plate on the back of the sauna for complete electrical specifications.
• This sauna requires a dedicated circuit - No other appliances should share the same outlet with the
sauna.
CHOOSING A LOCATION
• This sauna should only be placed INDOORS on a dry, level surface.
• There should be a minimum of 5 inches clearance between the sauna and any wall.
• Make sure the main power cord will reach the outlet and remains easy to access.
• The sauna should only be used in a dry location as moisture will damage the wood and electrical
components.
• Keep the sauna away from any potential hazards including water sources, flammable objects and
combustible materials.
3