SCS Sentinel KA-SA03 Mode D'emploi page 6

This alarm uses human motion infrared rays as control signals. When human enter
detection fields, it will start the sound system (alarm) to call attention that person enters
detection fields; Turn on and off with the remote control. Its installation is easy.
S
P EC I F I C A T I ON F OR REC E I VE R
Power supply: 4 x1.5VDC AA batteries or
adapter (not supplied)
Detection Range: 110°
Detection Distance: max.8m (<24℃)
Detection Motion Speed: 0.6~1.5m/s
S
P EC I F I C A T I ON F OR EM I T TE R
Power supply: 3 LR44 batteries
Emission Range: 80°
I
NS T A L L A T I ON A ND US E
1. Two different types of installation:
Connecting bracket and sensor, fixing the bracket to any place where you want to install
with enclosed screws. (Figure 1)
Hang the sensor in any place through the hanging hole directly which is at the back of the
sensor. (Figure 2)
Static Current: <3mA
Alarm Current: <100mA
Alarm Sound: >100dB
Working Temperature: -20~40℃
Working Humidity: <93%RH
Emission Distance: 8m
Static Current: 0mA
Figure 1
5