Regency B41XTE Série Guide D'installation Et D'utilisation page 39

11) Position Log E on top of Log G - fi t Log E into the pin on Log G as
shown below.
G
12) With Log E in position on Log G - ensure that Log E touches the
back corner of Log A as shown below.
E
13) Position Log B on top of Log A. Log B fi ts into the pin in Log A.
Ensure Log B sits upright 90 degrees with the left side of the log
resting on the notch in Log E. See next 2 diagrams.
918-863
Regency B41XTE Foyer à gaz à évent direct
E
A
B
A
E
14) Position Log C on top of Log H. Log C fi ts into the pin in Log H.
as shown below.
15) With Log C in position on Log H - assure that Log C contacts the
back corner of Log A as shown below.
A
3
B41XT
insTallaTion
B
C
C
09/23/09
39