nexstyle BATH Roma Manuel De L'utilisateur page 6

Installation (continued)
- Connect the water supply lines (4) (not
supplied) to the faucet shanks (2) using a
wrench . Do not over tighten .
- Loop supply lines (11) if they are too long.
- Secure metal nuts (12) of the supply
lines (11) to corresponding supply valves.
Tighten the nuts (12) by hand until they
are snug. Then tighten the nuts (12)
with a wrench .
QF033CR
Supply
Lines (4)
To Hot Water
Supply Valve
11
13
6
Sink
Faucet shanks (2)
1/2" NPS thread
1/2" FIP water
supply line
compatible
(not supplied)
To Cold Water
Supply Valve
Fig . 4
12
Fig . 5