Fiam NEUTRA 0191 Fiche Produit page 6

NEUTRA Coffee Table
EN
Art. 0191-0195-0196
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
1
Product description and intended use
1.1) Product description and composition
The NEUTRA Coffee Table - Art. Code 0191-0195-0196 is a Coffee Table intended as an item of indoor furniture. It is manufactured
from curved, annealed float plate glass. The NEUTRA Coffee Table was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B,
61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it.
1.2) Intended use
The article known as NEUTRA is designed and built to serve as an indoor Coffee Table and must therefore be used only for this
purpose and no other.
For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".
2
Safety instructions
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below.
If in doubt or if you require further information concerning the use of the product, please contact us on the telephone numbers
stated in this document.
2.1) Transporting and storing the NEUTRA Coffee Table in the original packaging
The NEUTRA Coffee Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.
It must be stored indoors in a dry place.
Place the NEUTRA Coffee Table in the original packaging, in the horizontal position. The arrows on the label on the packaging must
be vertical and pointing upward.
Never place weights or loads in excess of 100 Kg on the original packaging,. since exceeding this weight may cause the breakage
of the article.
The NEUTRA Coffee Table in the original packaging weighs about 75 kg. It must therefore be placed on surfaces capable of
supporting its weight.
2.2) Removing the packaging - assembly
To remove the original packaging of the NEUTRAL Coffee Table, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not strike the ATLAS Coffee Table with hammers or pointed
items which may crack or shatter the glass.
c) Remove the NEUTRA Coffee Table from its packaging. At least two people are required for this operation. Wear gloves which
assure a good grip on the float glass.