Publicité
Les langues disponibles
Les langues disponibles
FABRICANT DE POÊLES INTERNATIONAL / STOVE BUILDER INTERNATIONAL
INSTALLATION INSTRUCTIONS FOR FRESH AIR INTAKE KIT
AC01334
Fix the angled plate with the oval outlet such that the outlet faces the back wall.
Position the adapter underneath the stove. Align the two fixation holes on the adapter with
those located on the stove's rear heat shield. Fix the adapter into place with the four supplied
screws.
Note: To connect the adapter, use an insulated flexible fabric ducting with a 5-inch diameter
(AC02090). The ducting must be a HVAC type meeting ULC-S110 and/or UL-181. It must be
rated for temperatures up to 250 °F. Use the terminal supplied to cap the hole on the exterior
wall. Use the pipe clamps supplied to connect the pipe to the adapter and the wall terminal. If
you choose to draw fresh air from the floor, make sure that it directly connects to the exterior of
the house and that air circulates well enough to insure a proper supply of oxygen at all times.
45608A
Printed in Canada
09-09-2014
Publicité
