Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
Thank you for deciding to purchase the Air Flow Lumbar Support Cushion from Aidapt. This product is
manufactured from the finest materials available. When used correctly it is designed to give many years
of reliable, trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may
•
damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do not use
•
your product as it may compromise your safety, but contact your supplier for support.
INTENDED USE
The Air Flow Lumbar Support Cushion has been designed to improve your posture and to
•
help relieve pressure on the spine when seated. It is ideal for use in a car, at work or on any
seat you will be spending any length of time.
Ensure that the Air Flow Lumbar Support Cushion is fixed to the rear of the seat using the
•
attached strap and not on the seat pad itself.
Note: Avoid sharp objects such as zips and keys coming into contact with the cushion as this may
damage the product.
CLEANING
Clean your Air Flow Lumbar Support Cushion using a mild detergent with a slightly damp, soft cloth
only. Only use a mild detergent or disinfectant; never use an abrasive cleaner. Do not soak.
After cleaning, leave the product to dry in a warm, dry place, but not in direct contact with a heat source.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for service
support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing
any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or
its subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the
user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer
(detailed below) if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Usage and Maintenance Instructions
2
3EX
Ver.1 06/2013 (2652)
Publicité
