3. MAINTENANCE (
3.1 E
VERY THREE MONTHS
1. Disconnect power supply.
2. Unlatch the door. Lift the panel towards
you. Hold it firmly and hit on the right side
of the panel. The door will slide to the left.
3. Clean the inside of the door with a damp cloth.
4. Clean filters:
•
Remove filters.
•
Vacuum to remove most of the dust.
•
Wash with a mixture of warm water and mild soap. You may add bleach if you wish to disinfect
(one tablespoon per gallon). Rinse thoroughly. Shake filters to remove excess water and let dry.
5. Clean the condensation tray with a damp cloth.
6. Check the exterior air intake hood:
•
Make sure there are no leaves, twigs, ice or snow that could be
drawn into the vent.
•
Clean if necessary.
Even a partial blocking of this air vent could cause the unit
to malfunction.
7. Reassemble the components.
8. Reconnect power supply.
3.2 A
NNUAL MAINTENANCE
Repeat steps 1 to 6 from the previous Section and continue with the following steps:
Handle the heat recovery core with care.
1. Clean the heat recovery core:
•
Remove core.
•
Let it soak in a mixture of cold or lukewarm water and mild soap (dishwashing liquid).
•
Rinse thoroughly.
•
Shake the core to remove excess water and let it dry.
2. Clean blower assembly.
•
Remove dust using a vacuum cleaner with a soft brush attachment.
3. Reassemble the components.
4. Reconnect power supply.
'
)
CONT
D
(
'
)
CONT
D
VO0229
CAUTION
(
)
FALL
CAUTION
17
VD0035
VO0230