Secondary Heating Connection (Dwelling Heating Circuit); Sanitary Connection - meibes LogoPack A Mode D'emploi

5.2 Secondary heating connection (dwelling heating circuit)

1. Remove ball valve (C) from the unit and connect it to the flow line
of the dwelling heating circuit, ensuring that it is tension-free.
2. Connect the return line of the dwelling heating circuit to
transition nipple (D), ensuring that it is tension-free.

5.3 Sanitary connection

1. Connect the cold water connection from the line or the apartment connection to the cold water connecting piece (F) of the
PF controller, ensuring that it is tension-free (use a flat sealing screw fitting).
Details: hot water throttle plate
2. Connect the hot water supply line to the apartment
to the angle piece (E), ensuring that it is tension-free.
F
E
Do not forget the hot water throttle plate (G)!
G
D
C
23