Publicité
Les langues disponibles
Les langues disponibles
Installation
1) Measure and mark centerlines for
mounting bracket installation using
dimensions on page 1.
Note: 673TB-18, 673TB-24 and 673TP
only. Make sure both centerline marks
are level.
2a) Dry Wall Option: Place
mounting brackets into desired
position. Using brackets as a
guide, carefully drill 5/16" holes
into wall.
1
Note: For plaster walls 1/2" thick or
less, insert toggle tool into toggle
anchor to secure behind wall prior to
installing accessory trim.
Troubleshooting Chart
Problem
Finish is spotting.
Symmons Industries, Inc.
Copyright © 2016 Symmons Industries, Inc.
2b) Stud Option: Place mounting
brackets into desired position.
3) With mounting brackets in
position, secure to wall using
screws.
Cause
Elements in water supply may cause
water staining on finish.
■
■
31 Brooks Drive
Braintree, MA 02184
■
www.symmons.com
4) Hang top of accessory on
mounting bracket. Lower into
position.
1
5) Secure with set screw.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
■
Phone: (800) 796-6667
■
gethelp@symmons.com
1
1
2
Solution
rinse with water.
■
Fax: (800) 961-9621
■
■
ZV-3195 REV 0
030715
Publicité
