Installation; Assembly Instruction - HAMPTON BAY OFW148S Guide D'utilisation Et D'entretien

Installation

ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and make sure that you have all
parts listed (refer to parts list). If you are missing parts, please contact
1-877-527-0313 for further assistance.
1. Insert handle (A) into hole in mesh wire cover (B). Use wrench (CC) to
secure M6 nut (BB) to the underside of the mesh wire cover (B).
2. Assemble legs (G) and side panels (F) by inserting M6x12mm bolts (AA)
through predrilled holes as illustrated. Tighten with Phillips screwdriver.
3. With side panel assembly (from Step 2) upside down on a flat surface,
attach assembly to base (H) by inserting one M6x12mm bolt (AA)
through corresponding predrilled holes in each corner of the base (H)
and side panel assembly. Tighten with Phillips screwdriver.
1
A
2
G
F
3
H
Please contact 1-877-527-0313 for further assistance.
5
A
BB
B
AA
AA
HAMPTONBAY.COM