Vivog ES001 Notice D'utilisation, D'entretien Et De Securite page 3

Instructions for use, maintenance, and safety
POLYETHYLENE BATHTUB
ES001 et ES007
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
USING
Important: please follow the guidelines for use
Thank you for purchasing an electric bath. Below are the instructions for
care and maintenance and information about the guarantee of your
equipment.
CHARACTERISTICS
(available in 2 models)
- Patented polyethylene design
- Stainless steel double adjustable bracket
- "Easy access" door
- Non-slip bottom
- 2 straps and 2 plastic chains
- 4 adjustable feet (4 positions in 5 cm increments)
- 4 stainless steel floor fixation brackets
Small model : Special cats, small and medium dogs
Ext.Dimensions : L.135 x w.73 x d.50 cm
Int. Dimensions : L.125 x w.51 x d.41 cm
Variable height of the feet : 87, 92, 97 or 102 cm
Height of the bottom of the bathtub: 46 cm at the lowest point
Large model : Special medium and large dogs
Ext. Dimensions : L.148 x w.78 x d.50 cm
Int. Dimensions : L.138 x w.62 x d.45 cm
Variable height of the feet : 87, 92, 97 or 102 cm
Height of the bottom of the bathtub: 46 cm at the lowest point
Cleaning and Maintenance
The bathtub doesn't require any maintenance: wash with tepid water, use
a damp cloth and a soft washing liquid.
Do not use inappropriate solvents and aggressive liquids (e.g. cream,
greases, etc.).
ASSEMBLY INSTRUCTION
STEP 1 :
Screw the stainless leg on each
base of foot.
STEP 2 :
Place each foot on the bath-tub then
fix it using the provided screw.
STEP 3 :
Place the base on the ajustable foot
with the selected height. Then fix it
using the provided screw.
STEP 4 :
Assemble the various elements
of the plug. Then screw the
flexible tube on the plug.