Publicité
Les langues disponibles
Les langues disponibles
Instructions for use, maintenance, and safety
MULTIFUNCTION DRYER-BLASTER
VIVOG SC2700 (1800 WATTS)
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
USING THE MACHINE
Important: please follow the guidelines for use
Regulator to vary airflow speed from
100W to 1400 W
Chicane filter
Silence / quarter
turn for operator
comfort
Ozonator switch
GUIDELINES FOR USE IN THE DRYER/BLASTER MODE
The SC2700 dryer-blaster has been designed exclusively for use with
dogs and cats. It is equipped with a 400W heating element piloted by an
on/off/timer switch and a 0-400W regulator (temperature of 0°C to 35°C).
The air speed of the blaster (1400W motor) is piloted by an ON/OFF
switch; the heating element can only operate if the motor is turning. The
dryer is equipped with a regulator for the air speed from 100W to 1400W.
Output air speed from 26 to 37 m/s without the tubing and from 30 to 40
m/s with the tubing. 70 decibels.
You can thus adjust the power from 0 to 1400 W in order to adapt the
temperature of the outgoing air as a function of air flow and room
temperature. Hold the end of the air outlet hose at a sufficient distance
from the animal, and do not stay in the same place on the animal for
more than ten seconds. To obtain the best results when styling, it is
advisable to brush the fur with a soft brush without touching the skin.
GUIDELINES FOR USE IN THE SPA MODE
Turning the dryer on: Adjust the timer from 0 to 60 minutes depending on
the desired duration (an average of 15 to 30 minutes is recommended for
a relaxing bath). The ozonator can be used to purify the warm water with
the heater at 40°. The bubble mat and +/- 3 m long hose with non-return
valve are optional. For improved safety, fix the machine to the wall, 2
metres from the tub, with a right-angle screw-in hook with a diameter of
8 mm.
Caution for use in the SPA mode: Do not exceed one quarter of the
blaster power (see airflow speed regulator). Put the heater at 0 (see
temperature regulator).
SAFETY PRECAUTIONS
Before turning on your blaster-dryer please read and follow these
instructions carefully. Check that the voltage indicated on the dryer
corresponds to your electrical supply.
Temperature regulator from 0 to 400 W
(temperature of between 0° to 35°C)
Dual functions:
• ON/OFF switch of the blaster.
• Timer for the "Spa mode" function
Your electrical supply should meet current safety standards and be fitted
with a 30 mA circuit breaker.
- Never submerge the apparatus in water and never use in wet places.
- Never use the dryer near a bathtub, shower, or recipients that contain
liquids; if the dryer falls into water whilst connected to the power supply,
unplug the power supply before picking up the dryer.
- Do not use your machine if it accidentally falls into the water: take it to
the VIVOG technical assistance centre for inspection and repair if
necessary:
VIVOG SAS
2 rue de la Briaudière – CS40001
37515 BALLAN-MIRÉ CEDEX - FRANCE.
Tel. +33 (0)2 47 73 38 38 - fax. +33 (0)2 47 73 38 48
email : infos@vivog.fr
- If the apparatus stops working or does not work correctly, turn it off and
do not open it. Repairs should only be performed at the VIVOG technical
assistance centre.
- If the power cable is damaged, it should be discarded and replaced
with an identical model.
- Never use the apparatus with wet hands or feet.
- Never use the apparatus barefoot.
- Never use the extension lead in rooms that are destined for bathing or
showering without taking specific precautions.
- Never pull the power cable or the dryer itself to unplug it from the power
socket.
- Never allow children or unskilled persons to use the apparatus without
supervision.
- Never use the apparatus for anything other than the purpose for which it
is designed. This machine is not designed for use by persons (including
children) whose physical, sensory, or mental capacities are reduced, or
by unskilled or untrained persons, unless they are supervised by
someone who is responsible for their safety, or they have been instructed
in the use of the machine.
- Children should be monitored to ensure that they do not play with the
machine.
NEVER OPEN THE MACHINE YOURSELF
CLEANING AND MAINTENANCE
Follow the instructions for use, safety, and maintenance:
- The device should not be opened under any circumstances, do not
insert any thin or pointed objects such as a screwdriver into the device.
- Before cleaning, the device should be unplugged from the power
source.
- Particular care should be paid to the air inlet (this should be vacuumed
before each use using a dust vacuum). Once a week, wash the filter with
water (water + soap) to rid it of any dust that could impede correct
operation. To do this, unscrew the filter holder, wash the filter, dry it, and
then replace it.
At least once a year, it is advisable to send your Dryer-blaster to the after
sales service (ASS) of VIVOG for servicing and complete cleaning of the
motor and heating elements.
If you follow these guidelines, you will increase the lifespan of your device
and avoid faults.
PROBLEMS AND CAUSES OF POSSIBLE FAILURES
The dryer does not work:
1) Check the 220/240 V power supply at the plug.
2) If the power lead, switch, motor, or another part is defective, send the
machine to the VIVOG ASS for repairs.
The dryer-blaster only heats intermittently:
1) The safety function of the heating element is on: check that the filter is
clean.
2) The heating element is not working properly: get it changed by the ASS
of VIVOG.
Publicité
