Bouclair 1023492 Instructions D'installation page 4

INSTALLING
STEP 1. Select the
method of mounting that
best suits your purpose
(A, B or C).
STEP 2. Measure where you want the blind to hang, make sure that the blind is centered and level. Hold one
bracket at the desired height and width you have chosen and mark the screw holes with a pencil.
STEP 3. Drill pilot holes where you marked the screw holes. Use a screwdriver to attach the bracket to the wall or
ceiling using the screws provided.
STEP 4. After the first bracket is mounted, carefully position and attach the second bracket. Double check to be
sure that it is level with the first bracket and that both are the correct distance apart.
STEP 5. Lift blind into place pushing headrail slot onto the bracket bolt (see fig 1). Make sure that the blind cord
faces you. Place washer over bolt, then secure in position using wing nut (see fig 2 ).
STEP 6. Attach Child Safety Cord Cleat where required to prevent tangling or child strangulation.
1
OPERATION
LOWERING. Pull cord downward until blind reaches desired height and release the cord; blind will lock automatically.
RAISING. Hold cord at eye level and move to left gently until cord lock releases. Allow cord to slip through fingers
until blind reaches desired level. Move pull cord to the right and release; blind will lock automatically.
A. Inside mounting to the
inside or between the sides
of window frame.
2
Questions? customerservice@bouclair.com / 1 800 268-2524
B. Outside mounting to the
face or outside the window
frame.
C. Ceiling mounting overhead to
a surface such as the top inside
of window frame or the ceiling.
CHILD SAFETY
CORD CLEAT