Télécharger Imprimer la page

VonHaus 3005062 Instructions page 5

Publicité

ASSEMBLY / ASSEMBLÉE / VERSAMMLUNG / MONTAJE / MONTAGGIO / EL MONTAJE
EN -
To mount to a music stand or other suitable surface -
1. Unscrew the LOCKING CLAMP anti-clockwise to release. Take care not to over-loosen the clamp.
2. Position the Clamp on the required surface and screw the LOCKING CLAMP clockwise to secure.
To fit your tablet -
1. Extend the TOP CLAMP (5) by loosening the lock and pulling to the maximum height and securing the lock
again.
2. Insert your tablet into the TOP CLAMP (5) and adjust the legs and feet (3 & 4) to fit your tablet size. Allow the
tablet to rest on the bottom feet.
3. Unlock the TOP CLAMP (5) and secure over your tablet. Secure the lock once more to secure your tablet.
4. The mount should now be fully secured with your tablet. To adjust the viewing angle, simple twist using the
elbow joint (2) and swivel ball joint (1)
FR -
Pour monter sur un pupitre ou toute autre surface appropriée -
1. Dévissez la PINCE DE VERROUILLAGE dans le sens inverse des aiguilles d'une montre pour la libérer.
Veillez à ne pas trop desserrer la pince.
2. Positionnez la pince sur la surface requise et vissez la pince de verrouillage dans le sens horaire pour la fixer.
Pour adapter votre tablette -
1. Déployez la PINCE SUPÉRIEURE (5) en desserrant le verrou, en tirant à la hauteur maximale et en fixant à
nouveau le verrou.
2. Insérez votre tablette dans la PINCE SUPÉRIEURE (5) et ajustez les jambes et les pieds (3 et 4) en fonction
de la taille de votre tablette. Laissez la tablette reposer sur les pieds inférieurs.
3. Déverrouillez la PINCE SUPÉRIEURE (5) et fixez-la sur votre tablette. Fixez à nouveau le verrou pour sécur-
iser votre tablette.
4. Le support doit maintenant être entièrement fixé avec votre tablette. Pour ajuster l'angle de vision, simple
torsion à l'aide de l'articulation du coude (2) et de la rotule pivotante (1)
DE -
Zur Montage an einem Notenständer oder einer anderen geeigneten Oberfläche -
1. Lösen Sie die Verriegelungsklemme gegen den Uhrzeigersinn, um sie zu lösen. Achten Sie darauf, die
Klemme nicht zu stark zu lösen.
2. Positionieren Sie die Klemme auf der gewünschten Oberfläche und schrauben Sie die Verriegelungsklemme
im Uhrzeigersinn fest.
Passend für Ihr Tablet -
1. Ziehen Sie die obere Klemme (5) heraus, indem Sie das Schloss lösen, auf die maximale Höhe ziehen und
das Schloss wieder sichern.
2. Setzen Sie Ihr Tablet in die TOP CLAMP (5) ein und passen Sie die Beine und Füße (3 & 4) an Ihre Tab-
let-Größe an. Lassen Sie das Tablet auf den unteren Füßen ruhen.
3. Entriegeln Sie die TOP CLAMP (5) und sichern Sie sie über Ihrem Tablet. Sichern Sie das Schloss erneut, um
Ihr Tablet zu sichern.
4. Die Halterung sollte jetzt vollständig mit Ihrem Tablet gesichert sein. Zum Einstellen des Betrachtungswinkels
einfach mit dem Ellbogengelenk (2) und dem drehbaren Kugelgelenk (1) drehen.
A5P | 01

Publicité

loading

Ce manuel est également adapté pour:

3005063