iMaze Power HR Strap Guide De Démarrage Rapide

smartPulse for iPhone and iPad
EN
QUICK START GUIDE
A- Turn ON the Bluetooth® function of your iPhone/iPad®
1- Go to "Settings/Bluetooth®"
2- Toggle Bluetooth® to ON position
IMPORTANT: Don't try to pair devices on this page, just turn on Bluetooth® and then proceed to app instructions.
B- Installation of smartPulse
Download the app from iTunes® or App Store®. You
can also find it on our website.
C - Restart your device
Power OFF then restart you iPhone/iPad®.
IMPORTANT: To avoid connection problems and guarantee optimal performance, restart your phone every time you
want to connect or reconnect the strap to your device.
D- Turn ON location services function of the app
1- Go to Settings/Privacy/Location Services
2- Toggle smartPulse to ON position
E- Connect the Power HR strap with the app
1- Put on the Power HR strap.
Moisten both conductive pads
of the strap with water then
attach the strap comfortably
but tightly around your chest.
If the Bluetooth icon lights up but the Power HR strap doesn't connect, close the apps (including smartPulse) running in
the background then restart the app. A last option would be to restart your phone again. By closing all background-run-
ning apps, it prevents errors and ensures maximum performance of the Power HR strap (multiple open apps may cause
insufficient power and/or free memory of the iPhone/iPad®).
1- Double push the Home
button to display
multi-tasking display.
F- Go for a Run
1- Select your sport and your activity mode. Swipe
right to start a run. A small green dot appears on the button. If not, swipe
it again. The stopwatch starts and data will now be recorded. If the GPS
signal is insufficient, move to an open area away from buildings, trees
or any interfering structures. Wait for a moment then restart.
3- Anytime during the run,
you can swipe the Pause
button to pause. To restart
the stopwatch, swipe the Start
button again. Slide the panels
to display other information:
speed, pace, ghost, context,
histogram, altimeter...
IMPORTANT: Location services on your device must be turned ON (section D). The app is designed for outdoor use and
requires GPS signal acquisition. Turn ON cellular data to display the map in real time during the run.
Power HR strap
SFSTRHRP-BLE/001-GR
2- Launch the app and go to 3- Slide the panel to display
"My Run". After few seconds, your current heart rate or go
the Power HR strap links back to the power output
automatically. The Bluetooth® graph.
icon lights up. You can now
read your current power
output. Without activity, the
power output is null.
2- Close all background apps
the by each app upward. Then
press the Home button to
return to the main screen.
Start button to the 2- Put on your earphones,
attach your device to your
arm (armband optional) and
start running.
4- Anytime during the run, 5- Arrived at your destination,
Go to Map in the app to swipe the Stop
consult your route display a run. The stopwatch stops.
on the map. Tap Plus to The complete run is recorded
access the compass or in the device memory and is
manually mail your route and filed in Data. To reset the
current location (Facebook®, stopwatch, swipe the
Twitter®, Mails). button once again.
G- Disconnect the Power HR strap
Remove the Power HR strap by unclipping the snap
buttons then dry the conductive pads with a cloth and
store in a dry place.
IMPORTANT: Dry the conductive pads of the Power HR strap to preserve its battery life.
H- Listen to your favorite songs
If you are using the free version of smartPulse trainer:
IMPORTANT: Playlist creation from the app is only available in premium version.
If you are using the premium version of smartPulse trainer:
1- Go directly to
app
playlist. Hit the
to display
IMPORTANT: During a run you can also use the control buttons on Apple® earphones. Always stay aware of your
surroundings while running.
I- Voice feedback
IMPORTANT: If the Power HR strap is linked, the heart rate will be automatically added to the audio cue..
If you are using the free version of smartPulse trainer:
The app provides a voice feedback every 5 min. that includes total time, total distance, speed, average speed, calories
and heart rate. Always stay aware of your surroundings while running.
If you are using the premium version of smartPulse trainer:
Go to Settings/Voice
preferences:
1) Enable/disable the function.
2) Set frequency (in minutes) and volume level.
3) Personalize the audio cue: put music on pause,
synchronize with music, select information to be
presented such as total time, speed, average speed,
distance, calories, pace, and ghost.
J- See the recorded Run
After the run, go to
to scroll all information panels: Run details, Statistics, Start Localization, Weather report, Comments, Playlist.
You can add a title and comments. Tap the
IMPORTANT: The free app will only display the last run. To access a list of all recorded runs, upgrade to the premium
version.
button to end
K- Connect with a new Power HR strap or other sensors
- Power OFF then restart you iPhone/iPad®
- Connect the new Power HR strap with the app (section E)
Stop
You can connect only one Power HR strap to only one device and application at a time, but the Power HR strap can work
simultaneously with the bike combo kit.
© 2013 iMaze, Inc. All rights reserved. All trade and brand names are registered trademarks of their respective manufacturers.
1- Exit the app then open
Music app to select a playlist
or to play songs.
Music in the 2- Tap on the Plus/Minus
then create your buttons to add or remove
Plus button songs from the
Playlist window. library available on your
device. Once your playlist is
created, tap Done to save it.
in the app to set voice feedback
Data/My Runs to see the recorded run. Select the run from the list then slide left or right
Done button to quit.
ref. pack: imaze14-QSGIPP001-EN
www.iMazecorp.com
2- Then go to Music in the
app, the selected songs will
appear. You can now control
the songs from the app.
Slide to the right the
Start/Pause/Stop buttons to
play, pause, or stop your
songs. Slide the panels to
select next or previous track.
3- You can now control the
songs from the app. Slide to the
music right the Start/Pause/Stop
buttons to play, pause, or
stop your songs. Slide the
panels to select next or
previous track.