Publicité
Les langues disponibles
Les langues disponibles
2. Recommendations for commissioning the burner
a. Ignition electrodes
•
Check that there is no arc disturbance
•
Check the gap on the electrodes: 4 mm
• Check the position of the electrode against the black spot: it
must be on A
b. Flame tube and recirculation slit
•
Check the setting of the recirculation slit (see settings table on
next page)
•
Do not obstruct the recirculation slit if you have to insulate the
combustion chamber door
•
Check that the flame tube is correctly attached to the
intermediate tube (bayonet fully engaged)
3
Publicité
