SEYMO RT608 Mode D'emploi page 4

RT608 Engine temperature alarm SEYMO
1 engine configuration
For each engine / exhaust you have to adjust two
temperatures, follow the steps below
Once setup is complete try lower engine / exhaust
temperature that works perfectly.
Pushbutton up 1 configuration. Press for 3 seconds to
change the maximum temperature at which the 1st motor
alarm will be activated. With the plus and minus buttons,
when it is at the desired value, wait 3 seconds, and the
alarm value will be saved.
Engine 1º
Button down 1 configuration. Press for 3 seconds to set 1
degree less than the previous maximum temperature. When
it is at the desired value, wait 3 seconds, the alarm value will
be saved.
Example maximum temperature = 80 degrees (button up 1)
Down button1 = 79 degrees
English
+ -
+ -