WeatherHawk SM-28 SKYMASTER Manuel page 3

General Indicators
Modes
Wind Speed
Bar Graph:
Using the bar graph: The bar graph represents a 16-
hour history of the barometric pressure. The column
labeled "0" indicates the current pressure. Each
horizontal bar represents +/-2 mb/hpa as indicated by
the pressure value indicator. (Please note that the bar
graph will not be displayed until barometric history has
accumulated, as the Skymaster only records barometric
pressure while the unit is on.)
Low Battery Indicator:
Indicates the battery is running dry.
Data Screen:
Indicates the value of data being collected by the
Skymaster.
Units of Measure:
The Skymaster measures wind speed in six different
units of measure: Knots, Beaufort, Feet Per Minute,
Miles Per Hour, Meters Per Second, and Kilometers Per
Hour. To switch between units of measure please see
the Units of Measure section for instructions.
Current Wind speed:
In current wind speed mode, only the unit of measure
will be shown.
Maximum Wind speed:
Displays maximum speed recorded since the unit was
turned on.
Average Wind speed:
Displays a running average over ten seconds.
Wind-Chill:
Displays the effect that air temperature combined with
wind speed has on human skin.