Zyxel PLA450 Serie Mode D'emploi page 6

1 Launch an Internet browser (such as Internet Explorer). Enter "http://192.168.1.2" and
click Go (or press [ENTER]).
If the login screen does not display, make sure your computer is using a
static IP address between 192.168.1.3 and 192.168.1.254, as shown in
section 2.1. If that doesn't work, check your web browser's pop-up settings
(see the User's Guide for more information).
2 The default password (1234) is entered for you. Click Login.
3 Change the password in the next screen and click Apply.
4 Click Go to Basic setup.
3 Connect Wirelessly to the PLA450
You can use either Wi-Fi Protected Setup (WPS) or the web configurator to set up your
wireless connection and network.
ENGLISH
6