Drift Innovation GHOST X Guide Rapide page 8

7
VIDEO MODE
(Green LED) Press the
recording. The Status LED and LCD backlight
will flash red to indicate recording. Press the
button again to stop recording.
VIDEO SETTINGS
• Resolution
• Frame Rate
PHOTO MODE
(Yellow LED) The camera will capture still images
when the button is pressed, and the status
LED and LCD screen will flash red each time a
photo is captured.
PHOTO SETTINGS
• Resolution
CHANGE SETTINGS
In any mode press the
Press the button to change the option for the highlighted setting.
button to start
button to highlight a setting.
Camera Modes
TIMELAPSE MODE
(Purple LED) Press the
a series of still images at a specified rate. The
Status LED and LCD screen will flash red each
time an image is captured. To stop recording,
press the button once more.
TIMELAPSE SETTINGS
• Resolution
• Timelapse Interval
PHOTOBURST MODE
(Cyan LED) The camera will capture a burst
of still images for an allotted duration and
at a specified rate, when the
pressed. For best results, use a memory card
with the highest possible data rate.
PHOTOBURST SETTINGS
• Resolution
• Burst Duration/Capture Rate
button to capture
button is